Sylvac S Dial WORK NANO Smart User Manual

SET
MODE
6
E
1 . Operating features of the instrument
- The instrument has two operating modes: First level functions (direct access) and Second level functions. In
addition to the conguration functions, available access to the MIN, MAX and DELTA (TIR) mode, or display of
tolerances (see chaps. 3 and 4)
- The «favourite» key gives direct access to the function used most often (see chap. 9)
- Sets a Preset value, reset the MIN/MAX mode, veries a selection, and controls switching off the instrument.
By default, SIS mode enables automatic switch-off with no loss of origin (see chap. 11).
- With the «Left and Right» buttons, the user may change the extent of the analogue scale as well as enter the
values of the nominal dimension and tolerance limits. (see chap. 6.2)
- Personalising the functions
It is possible to activate or de-activate certain functions of the instrument via RS232 (see chap. 13)
- Data transmission parameters
4800Bds, 7 bits, even parity, 2 stop bits
2. Start
Press a button. (For a Bluetooth
®
connection, see chap 9.)

Sylvac S Dial WORK NANO Smart Specifications

General

Brand	Sylvac
Model	S Dial WORK NANO Smart
Category	Measuring Instruments
Language	English