Need help?Do you have a question about the Sylvac Hi Cal 450 and is the answer not in the manual?
General| Measuring Range | 0-450 mm |
|---|---|
| Resolution | 0.01 mm |
| Accuracy | ±0.03 mm |
| Display | LCD |
| Protection Class | IP40 |
| Power Supply | Battery |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10 to 60 °C |
Lists and describes the main parts of the Hi_Cal height gauge.
Details the functions of keys and indicators on the device's interface.
Guides the initial setup and checks before using the instrument.
Explains the direct functions assigned to each key on the keypad.
Describes how to measure and set the probe constant for accurate measurements.
Details the procedure for performing upward height measurements.
Details the RS232 connector pinout and data transmission parameters.
Instructions for replacing the measuring probe on the instrument.
Explains how to connect and use an optional foot pedal.
Describes how to adjust the cursor balance for different probe types.
Lists and explains common error codes and their solutions.
Guides on how to safely replace the instrument's batteries.
Provides detailed technical data for the Hi_Cal models.
Lists the items included in the standard package of the Hi_Cal.
Provides steps to reactivate corrections if they become inactive.
States compliance with quality standards and traceability.
To Next Page