Need help?Do you have a question about the Sylvac UL 4 and is the answer not in the manual?
General| Measuring Range | 0 - 4 mm |
|---|---|
| Display | LCD |
| Output | RS232 |
| Protection Class | IP40 |
| Power Supply | Battery or external power supply |
| Operating Temperature | 40 °C |
Activate or deactivate functions via RS232.
Parameters for data transmission: 4800Bds, 7 bits, even parity, 2 stop bits.
Press a button to start the instrument.
Access basic functions via short presses on the MODE button.
Pairing with master is automatically done at first connection.
Enter Preset value, select MIN/MAX mode, make standard measurement, and adjust.
Make measurements and reset the measured value before each new measurement.
To Next Page