8
4. Advanced functions (continuation)
SET
MODE
SET
MODE
SET
MODE
SET
MODE
SET
MODE
Introduction of a multiplier, other than 1.000
next digit 0...9 save the multiplier
Keypad lock : only the favourite key remains active
(to unlock the keypad, press for 5 s.)
SET
MODE
MACrEsEt
Bluetooth
® function
The connection procedure has been designed to be simple and is signalled by
the following three states :
1° Symbol off disconnected mode
2° Symbol blinking advertising mode
3° Symbol on connected mode
Connection :
1°Activate
Bluetooth
® Smart compatible software and hardware (Master : PC,
Display Unit)
2°Start the instrument. By default the
Bluetooth®
module is active and the
instrument is available for connection during 120s (advertising mode)
3°As soon as the device is detected, a connection is established automatical-
ly. If no connnection is established during 120s, reactivate the
Bluetooth
®
module using the bt / On menu.
4°Instrument is ready to communicate (connected mode)
5. Bluetooth
®
5.1 Pairing
Pairing with master is automatically done at rst connection.
To connect the instrument to a new master (new pairing), it is necessary to
clear all pairing information on the instrument using the bt / rESEt menu.
Automatic switch-off mode
MAn = de-activated, Auto = active (after 20 min.)
To Next Page
Loading...
Need help?
General
