Sylvac S Dial WORK - Instrument Operation Basics; Modes, Key Functions, and Personalization

CLEAR
MODE
PRESET
MASTER
6
E
1 . Operating features of the instrument
- The instrument has two operating modes: First level functions (direct access) and Second level functions. In
addition to the conguration functions, available access to display tolerances settings (see chaps. 3 and 4)
- The «favourite» key gives direct access to the function used most often (see chap. 8)
- Sets a Preset value, reset the MIN, veries a selection, and controls switching o󰀨 the instrument. By default,
SIS mode enables automatic switch-o󰀨 with no loss of origin (see chap. 10).
- Preset the origin to the master (>2s, see chapter 9)
- Personalising the functions
It is possible to activate or de-activate certain functions of the instrument via RS232 (see chap. 12)
- Data transmission parameters
4800Bds, 7 bits, even parity, 2 stop bits
2. Start
Press a button. (For a Bluetooth
®
connection, see chap 7.)