Sylvac S Dial WORK - Setting Tolerance Limits; Inputting Tolerance Values and Notes

CLEAR
9
E
..................... Input the nominal value
(see chap. 6)
..................... Input the lower tolerance limit
(see chap. 6)
..................... Input the upper tolerance limit
(see chap. 6)
5. Inputting (or modifying) tolerance limits
The tolerance limits are dened by introducing lower and upper intervals, compared to the nominal rating.
Note 1 :
- If no tolerance limits have been
dened by the user, the instrument
will only display the tolerance
limit indicators but will not turn on
the indicator lights (red - green -
yellow).
Note 2 :
- Depending on the case, we can cross the indicators (red and yellow) by reversing the order of the tolerance limit input.
(lower limit > upper limit)