Sylvac S Mike PRO Smart - Menu System Description; Preset Mode

14
8. Description of the menu system
The [MODE] key enables the selection of the different menus (each key stroke activates the following
menu). The [SET] key enables the activation of a function assigned to the corresponding selected menu.
To avoid a wrong action, each menu is active only during 5s. This period passed, the instrument switches au-
tomatically back to «Measuring Mode» as long as no action has been performed to the [MODE] or [SET] key.
9. Preset mode
Preset makes it possible to introduce a reference value different from zero.
Press many times the [MODE] button until menu «PRE» appears. Then press the [SET] button to activate
the function Introduction of Preset. The display shows 00.000 or the last stored value of Preset. The first
digit blinks.
Each push on the [SET] button modifies the value of the digit above the cursor (±, 0..9).