What to do if the Sylvania 6513DF infrared remote control is not working?
- JJacob DayJul 30, 2025
If the infrared remote control isn't working with your Sylvania TV DVD Combo, try these steps: 1. Ensure the power plug of the TV DVD Combo is connected to an AC outlet. 2. Check and replace the batteries in the remote control if necessary. 3. Aim the remote control directly at the remote sensor on the TV DVD Combo. 4. Remove any obstacles blocking the path between the remote and the sensor. 5. Make sure you are within 23 feet of the unit. 6. Verify that the correct mode is selected by pressing the [SELECT] button.