Sylvania SB3205 - Placement and Mounting; Mounting to a Wooden Wall; Mounting to a Brick Wall

PLACEMENT AND MOUNTING
1. Placing the device on table
Ventilation
When placing the Sound Bar on an entertainment center, bookshelf or any type of
enclosed space, be sure to allow space around the Sound Bar for ventilation.
If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from
the Sound Bar could produce a potential heat hazard.
2.1 Mounting to a wooden wall
A. Mark the position of the mounting screws on the wall using a pencil.
B. Drill the supplied screws directly into the marks that you have made on the wall and
leave approx. 0.3 inches in length to hook the sound bar.
C. Put the sound bar onto the mounting screws. Make sure they are firm and stable.
2.2 Mounting to a brick wall
A. Mark the position of the mounting screws on the wall using a pencil.
B. Drill 2 holes on wall with a powerful electric drill.
C. Insert the supplied fixing plug and hammer into the holes.
D. Secure the supplied screws into the fixing plugs and leave approx. 0.3 inches in length
to hook the sound bar.
E. Put the sound bar onto the mounting screws. Make sure they are firm and stable.
4
22 inches
22 inches
screw
(not included)
screw
plastic insert
(not included)