Sylvania SDVD1010 - Operation; Operating the Main Unit; Operating the Secondary Unit

1. Recharge or connect the unit to AC/DC Adaptor/ Car Adaptor as previous procedure.
3. Insert the disc to the center spindle with label side face up and close the lid.
4. Power on the unit by sliding the POWER ON/OFFswitchonthe unittotheON
position.

Thegreenindicatorwillturnonandtheunitwillstartplaybackautomatically.
5. Forprivatelistening,insertheadphonesintothephonejack.Theexternalspeakerswill
disconnect automatically.
6. To
poweroff,slidethePOWER ON/OFFswitchtotheOFFposition.
SECONDARY UNIT:
1. Connect the secondary unit to the main unit by the supplied DC and AV connection
cables as previous procedures.
2. Slide the POWER ON/OFFswitch totheONpositiontopower
on the secondary unit.
4. Forprivatelistening,inserttheheadphonesintothephonejack.Thespeakerswill
disconnect automatically.
poweroff,slidethePOWER ON/OFFswitchtoOFFposition.
Operation
3. Press the DISPLAY SETUP
button to enter the display setting menu.
MAIN UNIT:
Press the DISPLAY SETUP button to
confirm.
2. Press the OPEN button on main unit to open the CD door.
13
Press button to set the picture brightness.
VOL +/-
Press button to skip to next item, press button to set picture contrast.
MUTE
VOL +/-
Press button to skip to next item, press button to set picture color.
MUTE
VOL +/-
Press button to skip to next item, press button to set the language.
MUTE
VOL +/-
5.
To
Press button to set the volume.
VOL +/-
Press the DISPLAY SETUP button to
confirm.
Press button to set the aspect ratio to 4:3 or 16:9.
VOL +/-
Press the DISPLAY SETUP button to
confirm.
Press button to set the TV Type to AUTO, PAL, NTSC or SECAM.
VOL +/-
Press the DISPLAY SETUP button to
confirm.
Press button to reset for reset setting and exit.
VOL +/-
Press the DISPLAY ON/OFF
button to cursor up and down.
MUTE
or