Sylvania SP953 - Troubleshooting; Connectivity and Power Issues; Control and Audio Issues

LED Status
Blue LED flashing & Blue LED solid
Bluetooth Mode
Green LED on solid
Aux Mode
Red LED
Charging
Red LED off
Full charged
Troubleshooting
Unit doesn’t connect to device
Speaker needs to be connected/
re-paired to device
A tone is heard every few seconds
Speaker needs to be charged
Unit will no power on
Speaker needs to be charged
Unit doesn’t control track(s)/volume
Speaker needs to be in Bluetooth mode
for full control
Unit distorts at high volume
The devices’ volume needs to be lowered
Care and Maintenance
Read the following recommendations before using the Bluetooth Speaker. Following
these you will be able to enjoy the product for many years.
• Do not expose the Bluetooth Speakers to liquid, moisture or humidity to avoid the
product's internal circuit being affected.
• Do not use abrasive cleaning solvents to clean the device.
• Do not expose the device to extremely high or low temperature as this will shorten the
life of electronic devices, destroy the battery or distort certain plastic parts.
• Do not dispose of the device in a fire as it will result in an explosion.
• Do not expose the device to contact with sharp objects as this will cause scratches
and damage.
• Do not let the device fall on the floor. The internal circuit might get damaged.
• DO not attempt to disassemble the device as it may get damaged if you are not
professional.