33
10. Taking Care of Your Scooter
Washing
Fully cool down the engine, muffler, brakes and other high-temperature parts before washing. We suggest
you to cover the muffler’s exhaust vent and shut the ignition switch slot.
Rinse your scooter with cold water from a water hose to remove dirt.
Mix a neutral detergent that is designed for scooters or automobiles and water in a bucket. Use a
sponge to wash your scooter.
After washing, rinse your scooter thoroughly with clean water to remove the residue.
Use an air gun to blow off the water and use a clean soft cloth to dry your scooter.
Carefully ride your scooter at a slow speed and apply the brakes several times to help drying the
brakes.
NOTE :
Do not rinse the radiator with high water pressure.
Specially take care of the matt color plastic parts if they are equipped. Never wax matt color parts.
To Next Page
Loading...
