1. GENERAL INFORMATION
1-5
Specifications
Make SANYANG MODEL JET 50 SERIES
Overall Length 1785 mm Front TELESCOPIC
Overall Width 630 mm
Suspension
System
Rear UNlT SWING
Overall Height 1115 mm Front 120 / 70 – 12
DIMENSION
Wheel Base 1275 mm
Tire
Specifications
Rear 130 / 70 – 12
Front 40 kg
Rear 54 kg
Front
DlSK (ψ190mm)
Curb
Wei
ht
Total 94 kg
Brake System
Rear
DRUM (ψ110mm)
Passengers /
Weight
Two /110 kg Max. Speed 50 km/hr Below
Front 84 kg Climb Ability 22° Below
Rear 120 kg Primary Reduction BELT
WEIGHT
Total Weight
Total 204 kg
Secondary
Reduction
GEAR
Type Gasoline Clutch Centrifugal, dry type
Installation and
arrangement
Horizontal, below
center, incline
FORMAN PERCE
Transmission C.V.T.
Fuel Used Unleaded (92/95) Speedometer 0 ~ 90 km/hr
Cycle/Cooling
2-stroke/forced air
cooled
Horn 80 ~ 112 dB/A
Bore 39 mm Muffler Expansion & Pulse Type
Stroke 41.4 mm
Exhaust Pipe Position
and Direction
Right side, and Backward
Cylinder
Number/Arran
gement
Single Cylinder Lubrication System Separated-lubrication
Displacement 49.4 cc Solid Particulate
Compression
Ratio
7.2 : 1 CO
8.0 g/km ↓
Max. HP 3.2 kw / 7000 rpm
Exhaust
Concentration
HC
5.0 g/km ↓
Max. Torque 4.6 Nm / 6500 rpm E.E.C. Below 2g / test
Ignition C.D.I. P.C.V. X
ENGINE
Starting System Electrical & kick
Catalytic reaction
control system
○
This chapter Contents
To Next Page
Loading...
