What to do if Sym Joymax Z LW12W1-EU engine does not start and the horn doesn't work?
If your Sym Scooter's engine won't start and the horn doesn't sound when you turn the ignition switch key “ON” and press the horn button, the fuse may have blown. Remove the front body cover to check the fuse box. If the wire is obviously melted, it needs replacement.
General| Fuel System | Electronic Fuel Injection (EFI) |
|---|---|
| Transmission | CVT |
| Front Suspension | Telescopic fork |
| Front Brake | Disc |
| Front Tire | 120/70-14 |
| Length | 2, 190 mm |
| Width | 760 mm |
| Height | 1, 440 mm |
| Starter | Electric |
| Engine Type | 4-stroke, Single cylinder |
| Rear Brake | Disc |
| Fuel Capacity | 12 liters |
Essential safety precautions and advice for operating the scooter responsibly.
Importance of using authentic SYM parts for optimal performance and longevity.
Details the dashboard's indicators, gauges, and controls for vehicle information and operation.
Explains the operation of the ignition switch and its various positions.
Details the controls located on the right side of the handlebar for engine operation.
Details the controls located on the left side of the handlebar for signals and lighting.
Describes the adjustable windscreen and how to change its position.
Explains how to open, close, and secure the fuel tank cap.
Details the front compartment, including the USB power outlet and its usage.
Describes the under-seat luggage box, its capacity, and load limitations.
Explains the function and operation of the side stand and its safety switch.
Details the operation of the main stand for parking the scooter upright.
Describes the passenger footrests and how to deploy them.
Guidelines for the initial 1000 km to ensure scooter reliability and performance.
Explains how to use the throttle grip for acceleration and deceleration.
Steps for safely starting to move the scooter from a standstill.
Instructions on how to apply brakes effectively and safely, including ABS.
Explains the function and characteristics of the ABS system for specific models.
Highlights the owner's responsibility for keeping the scooter in good condition.
Lists essential checks to perform before every ride for safety and performance.
Provides steps for checking oil level and details on oil change procedures.
Details the process and specifications for changing transmission oil.
Explains how to check fuel levels and recommended fuel type.
Guides on checking and topping up engine coolant levels.
Recommends using SYM Long Life Coolant and provides concentration details.
Covers inspection of brake fluid level, brake pads, and calipers.
Instructions for inspecting brake pad wear and replacement guidelines.
Details how to check and adjust throttle grip free play.
Provides guidance on checking tire pressure, tread depth, and condition.
Explains how to inspect the front forks and steering for damage or issues.
Steps for accessing and checking the fuse box and fuses.
Guides on inspecting and removing the sealed type battery.
Details on checking the spark plug, its gap, and recommended types.
Explains how to inspect and clean the air cleaner elements for optimal performance.
Instructions for adjusting headlight aim, recommending dealer service.
Describes how to adjust the rear shock absorber spring preload.
Lists parts requiring lubrication and the type of lubricant to use.
Information about the ECU's data recording capabilities and privacy.
Provides a step-by-step guide on how to properly wash the scooter.
A table of common issues and checks for an engine that won't start.
Symptoms and troubleshooting steps for engine overheating issues.
Guidance on what to do if the EFi warning light illuminates.
Troubleshooting for the ABS indicator light and potential brake system problems.
To Next Page