15. ELECTRICAL EQUIPMENT
15-19
Bulb Replacement
Headlight/position light
JET EURO 50/100
Remove front cover.
Remove bulb seat and replace the bulb.
Install the all removed parts.
JET 50/100
Remove front cover.
Loosen the headlight bulb stop plate and replace
the bulb.
Remove the position light bulb seat and replace
the bulb.
Install the all removed parts.
Tail light / Brake light
Remove 3 screws and then remove tail cover
Remove 1 screw and then remove tail light lens.
Replace tail light or winker light bulb
Screws
Position light
Headlight
Screw
Position light
Headlight
This chapter Contents