7
Mileage Setting:
Engine oil change warning lamp:
It is used to indicate the oil exchange time, with lights, when the vehicle was driven about 1000
kilometers, indicator light will light up, warn the users to replace the oil. After finish oil change ,short press
"SET" button two times in “OIL” mode, then the indicator light will go out.
Fuel Meter:
The pointer in this meter shows how much fuel remains in the tank.
The pointer stays in “E” position when key switch is turned to “OFF”
Switching kilometers and miles:
In total display status ,Long press “S” and “M” button 2±0.5 seconds, The mileage value can be reset
to zero.
Trip reset:
In TRIP display status ,Press “S” button 2±0.5 seconds ,can change the public mile display.
Long press “S” button
short press “M”
Short press “S” button
two times
short press “M”
Single mileage
mileage value is removed
Oil mileage
Oil mileage value is removed
Total mileage
Clock Setting:
Short press “M”
Short press “M”
Short press “M”
Short press “s”
Short press “s”
Short press “s”
Hour
Minute (units digit)
Return to normal mode
Short Press “S”
Short press “S”
Long press “M”
Clock
Voltag
clock settings
To Next Page
Loading...
Need help?
General
