Sym MaxSym 600i ABS - Engine Control Switch; Storage Box; Pillion Step

13
7. Use of each component
ENGINE CONTROL SWITCH
 This switch is located in the luggage box, under the seat.
 To set on the ENG. control switch, switch it to〝 LOCK〞.
 Switch to〝 UNLOCK〞，before start the engine.
 Be sure the seat locked preperly after set on the switch.
STORAGE BOX
 This box is located under the saddle.
 Maximum load capacity: 10kg.
 Do not store valuables in the box.
 Make sure that the saddle has been locked completely after it was pressed down.
 Take out valuables before washing to avoid wetting these objects.
 Do not place thermal sensitive objects in the box because of engine’s heat and high temperature.
PILLION STEP
 Press down the button and the pillion step goes
out.
Pillion
engine control switch