BATTERY LOADING FOR HELICOPTER AND READY
TO FLY
Hover up and down
Learn how to hover (fly in place) first-once
you’ve mastered this operation, flying is easy.
Once you can hover, try moving up and down
with the throttle stick (left). Move the throttle
stick gradually.
Push the right control throttle up - the nose of
helicopter will point downward, the tail motor
will activate, and the helicopter will fly forward.
Pull right control throttle down – the nose of
helicopter will point upward, the tail motor
will activate, and the helicopter will fly backward.
Turn left,turn right
Forward Reverse
Pull the direction control lever to the left or to
the right, the helicopterwill turn to the left or
to the right.
High/Low speed Function
Low Speed:Press the High/Low speed switch key
for one time, the buzz will send out one
sound.
High Speed:Please press the High/Low speed switch
once again, the buzz will send out two
sounds.
Calibration Trim Control: if the helicopter is turning excessively
to the right or left, or turning out of control, adjust the trim
control button using the instruction below.
If helicopter rotates counter-clockwise…Continually push right R/C calibration
until excessive turning stops.
If helicopter rotates clockwise…Continually push left R/C calibration until
excessive turning stops.
To Next Page
Loading...
