SYMA S36 - Overhaul; Parts (Optional)

-4-
OVERHAUL
Reason
PARTS (OPTIONAL)
Below are the parts available for your kindly selection.In order to facilitate our customers for placing an
order, we specially offer all kinds of parts for your kindly selection.You can buy these parts via our local
agent as well.
Head Cover(Black)
Main frame
Head Cover(White)
Tripod
Tail blade Balance bar
Tail decoration
(Black)
Tail decoration
(White)
Connectine buckle
Upper / Down
blade clip
TransmitterBattery
Main blades(Black)
Main blades(White)
USB Charge CableReceiving board
Tail supporting
tube assembly
Aluminum plate
assembly (Silver)
Aluminum plate
assembly (Black)
Main seatGear assembly Tail assembly
Main motor A Main motor B
Problem
Solution
No response
from the
helicopter
1.Insufficient power with the helicopter.
2.Insufficient power with the transmitter,
power indicator keeps flashing.
3.The band of the transmitter does not
correspond to the decoding of the
helicopter.
1.Please charge to the helicopter.
2.Replace the battery inside the
transmitter.
3.Adjust the band on the transmitter
and keep it the same as the helicopter.
The
helicopter’s
response is
not smart.
1.Insufficient power with the transmitter.
2.Transmitter of the same frequency is
used nearby.
1.Replace the battery.
2.Change to another place where there
is no the same frequency interfering
with it.
S36-01A S36-02A S36-02B S36-03A
S36-03B S36-03C S36-04 S36-05A S36-05B
S36-06 S36-07 S36-08 S36-09 S36-11
S36-12A
S36-15
S36-17
S36-12B
S36-16
S36-12C S36-13A S36-13B
S36-14
S36-01B