9.3 Information for service technicians
Upon request by the servicing personnel, appropriate instructions for service adjustments and procedures for each laser model are
only provided in a specified service manual. To ensure safe service and safe usage after service, as well as guaranteeing that the
high-quality standard of the product remains intact, service of the device should only be performed by a service technician authorized
by the manufacturer. The service manual includes:
- Clear warnings and precautions to be taken to avoid possible exposure to laser radiation above Class 1 and similar hazards;
- A list of controls and procedures, implementable by persons other than the manufacturer or his or her agents, which
increase the accessible emission levels of radiation;
- Clear warnings and precautions to be taken to avoid exposure to possible battery failure and similar hazards;
- A list of controls and procedures, implementable by persons other than the manufacturer or his or her agents, which
increase the exposure to possible battery failure and similar hazards;
- Protective procedures for service personnel; and
- legible reproductions (color is optional) of required labels and hazard warnings.
The following can be supplied upon request: Wire schematic, wire schematic component part lists, descriptions, calibration
instructions or any other information that will assist in repairing the parts of the device that have been designated by the manufacturer
as repairable by external service personnel. All parts will be supplied by the manufacturer to ensure that correct components are used
by the service personnel.
To Next Page
Loading...
