17
Operating Mode
In normal mode, the scans are uploaded directly to computer via USB cable or
wireless dongle. If succeeds, barcode scannner will make a low-frequency short
tone. If it fails, there willl be three low frequency short tones to alarm.
In normal mode, if fails, the data will be lost.You can scan below:
Storage Mode
By scan “Total amount of stored barcode” setup barcode, to check the total
amount of scanned barcodes in storage:
If the internal storage is full, the scanner will emit three low-frequency short
tones to alarm.
normal mode
Wireless Scanning and Payment All-in-One Device
If the transfer range is beyond 2.4G wireless transfer range storage mode
is suggested, in which scans are stored in internal cache after being scanned.
In storage mode, if a barcode is scanned and the scanner will make a short
tone and scans are automatically stored in scanner's internal storage.
Total amount of stored barcode
To Next Page
Loading...
