Performance Data
Frequency Response
+0, -3 dB 10_Hz to 60 kHz
Distortion (THD) .04 %, +4 dBu in, +4 dBu out, 10 dB gain reduction, 1 kHz, 30
kHz low-pass filter
.01 %, +4 dBu in, +4 dBu out, 10 dB gain reduction, 20 kHz,
30 kHz low-pass filter
.02 %, +18 dBu output, 0 gain reduction, 20-20 kHz, 30 kHz
low-pass filter
Crosstalk
-95 db @ 1k, -95 dB @ 10k, + 4dBu in, remaining channel
terminated in 600 ohms, 20k rolloff in analyzer.
Dynamic Range
115 dB (difference of maximum output and noise floor)
Input CMRR
greater than 40 dB @ 1kHz
Output Noise
-90 dBu, measured at balanced output, input terminated in
600 ohms, 20 kHz rolloff in analyzer.
Physical
Connectors
input: XLR-3F, 1/4" TRS
output: XLR-3M, 1/4" TRS
sidechain: 1/4" TRS (one)
Polarity pin 2 of XLR is hot, tip of TRS jacks is hot.
Size (hwd), in & cm 1.75 x 19 x 7.25 in
4.44 x 48.3 x 18.4 cm
Weight, lbs & kg 8 lbs (3.63kg) net
11 lbs (4.6kg) shipping
Electrical
Approvals
Listed by Underwriters Laboratories, Inc. Control number
2T38.
Power requirements
117V AC nominal, 105-125VAC 50-60 Hz, 12.5 Watts
maximum
230V AC nominal, 205-253V AC 50 Hz, 12.5 Watts maximum
In the interest of continuous product improvement, Symetrix Inc. reserves the right to alter,
change, or modify these specifications without prior notice.
Rev 2.0, 10/29/93
12-2
To Next Page
Loading...
