Symetrix 425 - Other Safety Information

1.2.2. Terms
Several notational conventions are used in this manual. Some paragraphs may use Note,
Caution, or Warning as a heading. These headings have the following meaning:
Convention Description
Caution
Identifies information that, if not heeded, may cause
damage to the 425 or other equipment in your system.
NOTE
Identifies information that needs extra emphasis. A
Note generally supplies extra information to help you
use the 425 better.
Warning
Identifies information that, if ignored, may be
hazardous to your health or that of others.
In addition, certain typefaces and capitalization are used to identify certain words. These
situations are:
Convention Meaning
CAPITALS
Controls, switches or other markings on the chassis.
Boldface
Strong emphasis.
1.3. Other Safety Information
Power Source
This product is intended to operate from a power source
that does not apply more than 250V rms between the
power supply conductors or between either power
supply conductor and ground. A protective ground
connection, by way of the grounding conductor in the
power cord, is essential for safe operation
Grounding
The chassis of this product is grounded through the
grounding conductor of the power cord. To avoid
electric shock, plug the power cord into a properly
wired receptacle before making any connections to the
product. A protective ground connection, by way of the
grounding conductor in the power cord, is essential for
safe operation.
Danger from Loss of
Ground
If the protective ground connection is lost, all accessible
conductive parts, including knobs and controls that
may appear to be insulated, can render an electric
shock.
Proper Power Cord Use only the power cord and connector specified for the
product and your operating locale.
Use only a cord that is in good condition.
Rev 2.0, 10/29/93
1-3