Symmetricom 8040C User Manual

15254-201.docx 11 Rev. C, 07/12/2011
3. Use the dipswitch positions shown in Table 4 to generate a specific output format
on a specific BNC. For example, to generate 10 MHz TTL on BNC3, set SW3
position 1 to ON, position 2 to OFF, and position 3 to OFF.
Table 4: Output Configuration Table
Output Format
Position 1
Position 2
Position 3
10 MHz Sine
OFF
OFF
OFF
10 MHz TTL
ON
OFF
OFF
5 MHz Sine
OFF
OFF
ON
5 MHz TTL
ON
OFF
ON
1 MHz Sine
OFF
ON
OFF
1 MHz TTL
ON
ON
Off
1 PPS
ON
ON
ON
4. After setting the outputs, replace the top cover and apply power.

Symmetricom 8040C Specifications

General

Brand	Symmetricom
Model	8040C
Category	Test Equipment
Language	English