To Next PageTo Next PageWhy is my Symmons Bathroom Fixture finish spotting?
Spotting on the finish of your Symmons Bathroom Fixture may be due to elements present in your water supply, which can cause water staining. To resolve this, clean the finished trim area using a soft cloth with mild soap and water or a non-abrasive cleaner. Make sure to rinse quickly with water afterwards.
General| Brand | Symmons |
|---|---|
| Model | Duro 3600-TRM |
| Category | Bathroom Fixtures |
| Collection | Duro |
| Material | Brass |
| Finish | Chrome |
| Handle Style | Lever |
| Flow Rate | 2.5 GPM |
| ADA Compliant | Yes |
| Pressure Range | 20-80 PSI |
| Warranty | Limited Lifetime |
Instructions for removing the test cap before installing the trim on TRMTC models.
Guidance on adjusting the packing nut for proper handle friction on TRMTC models.
Procedure for setting the temperature limit stop screw to prevent scalding on TRMTC models.
Steps for installing the shower valve trim, including mounting plate and dome cover.
Instructions for installing the diverter valve trim, including mounting plate and escutcheon.
Steps for attaching the shower arm, showerhead, and tub spout.
Guidance for installing the slide bar assembly using dry wall or stud mounting options.
How to operate the shower handle for cold, warm, and hot water positions.
Operating positions for diverting water between dual outlets.
Operating positions for diverting water between triple outlets.
Solution for finish spotting caused by water staining.
