Symmons Origins Series User Manual

Origins
™

-1.5 1.5 gpm (5.7 L/min) flow restrictor

-2.0 2.0 gpm (7.6 L/min) flow restrictor

-231 Super showerhead in place of Clear-Flo

-295 Institutional showerhead in place of
Clear-Flo

-SS Slip spout on any tub/shower unit

-X Integral service stops

-CHKS Integral check stops

-IPS 1/2” female IPS connections

-REV Reverse coring for back to back
installations

-B Chrome brass escutcheon

-D Chrome brass dome cover

-VP Vandal proof escutcheon screws

-OP 13” oval plate

-L/HD Less showerhead

-TRM Trim only, valve not included
Model Numbers
Operation & Maintenance Manual
S-9600-P, S-9600TS-P, S-9601-P, S-9602-P
Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Compliance
Certied by
CSA Group
Modifications
Note: Append appropriate -sufx to model number.
-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)
2.0 gpm (7.6 L/min)

S-9600-P
Origins Shower Valve

S-9600TS-P
Origins Tub/Shower Valve

S-9601-P
Origins Shower System

S-9602-P
Origins Tub/Shower System
S-9600-P/S-9601-P
Shower system powered by the Temptrol
®
Pressure
Balancing valve. Features adjustable stop screw to
limit handle turn, integrated volume control, 1 mode
showerhead with easy to clean rubber nozzles and
standard 2.5 gpm (9.5 L/min) ow restrictor. Components
made from metal and nonmetallic materials plated in
standard polished chrome nish.
S-9600TS-P/S-9602-P
Tub/shower system powered by the Temptrol
®
Pressure
Balancing valve. Features adjustable stop screw to limit
handle turn, integrated diverter, non-diverter tub spout, 1
mode showerhead with easy to clean rubber nozzles and
standard 2.5 gpm (9.5 L/min) ow restrictor. Components
made from metal and nonmetallic materials plated in
standard polished chrome nish.
For California Residents
WARNING: This product contains chemicals known to
the State of California to cause cancer, birth defects, or
other reproductive harm.

Symmons Origins Series Specifications

General

Brand	Symmons
Model	Origins Series
Category	Bathroom Fixtures
Language	English

Summary

Product Information and Specifications

Model Variants and Specifications

Details on Symmons Origins shower valve and system models, including their specifications.

Product Modifications and Options

List of available modifications for Symmons Origins shower systems, such as flow restrictors and trim.

Compliance Standards and Warranty

Information on product compliance, California safety warnings, and warranty terms.

Product Dimensions and Measurements

Installation Dimensions

Detailed measurements and diagrams for installing Symmons Origins shower systems.

Parts Breakdown and Tools

Replacement Parts List

Catalog of replacement parts for Symmons Origins shower systems with part numbers.

Installation Tools

List of essential tools required for the installation and maintenance of Symmons Origins shower systems.

Installation Procedure

Installation Steps

Comprehensive guide detailing the process of installing the Symmons Origins shower system.

Operation and Troubleshooting

Operating the Shower System

Instructions for controlling temperature, diverter, and volume on Symmons Origins shower systems.

Troubleshooting Common Issues

Solutions for common problems such as water spotting and finish issues with Symmons Origins products.