To Next PageTo Next PageHow to clean spotting finish on Symmons Plumbing Product?
If the finish of your Symmons Plumbing Product is spotting, it could be due to elements in your water supply causing water stains. To resolve this, clean the finished trim area with a soft cloth, using mild soap and water or a non-abrasive cleaner. Quickly rinse with water afterward.
General| Brand | Symmons |
|---|---|
| Model | Origins S-9602P-RP |
| Category | Plumbing Product |
| Language | English |
Standard Origins Tub/Shower System.
Tub/Shower system with integral service stops for water shutoff.
Temptrol Pressure Balancing valve, integral service stops, diverter control, 1-mode showerhead, non-diverter tub spout, 2.5 gpm flow restrictor.
Compliant with ASME A112.18.1/CSA B125.1 standards.
Detailed measurements for showerhead, arm, flange, valve hole size, and rough-in.
Identifies key components like showerhead, arm, handle, and spout with their part numbers.
Lists essential tools such as wrenches, screwdriver, plumber tape, and silicone.
Guide for installing the diverter handle into the shower escutcheon.
Instructions for securing the shower escutcheon to the shower valve.
Procedure for installing the dome cover onto the valve.
Steps for attaching the main handle, set screw, and plug button.
How to attach the shower arm and flange to the vertical shower pipe.
Instructions for screwing the showerhead onto the shower arm.
Guidance on installing the tub spout onto its pipe fitting.
How to adjust the shower handle for cold, warm, and hot water positions.
Instructions on using the diverter handle for tub spout or showerhead.
Addresses finish spotting due to water staining and provides cleaning advice.
