Symmons Dia 352TS - User Manual

1
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ gethelp@symmons.com ■ ZV-3014 REV 0 01/15/2014
352TS
Dia
™
Diverter Tub Spout
Operation & Maintenance Manual
Model Number Specifications
352TS Dia Diverter Tub Spout
7" diverter tub spout made from metal and plastic
materials plated in standard polished chrome nish.
Modifications Compliance
-STN Satin nickel finish
Note: Append appropriate -sufx to model number.
-ASME A112.18.1/CSA B125.1
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Dimensions
Measurements
A Ø 2 1/2”, 64 mm
B 4 3/4”, 121 mm
C 7”, 178 mm
D 1/2”-14 NPT
Required for Installation
Teon Tape
Note: Dimensions are subject to change without notice.
CC
D
D
B
B
AA

Summary

Product Specifications and Compliance

Specifications

7" diverter tub spout made from metal and plastic materials plated in standard polished chrome finish.

Compliance

Lists the ASME A112.18.1/CSA B125.1 standards the tub spout meets.

Warranty

Details limited lifetime warranty for consumers and 5 years for commercial installations.

Product Modifications

Satin Nickel Finish

Specifies the '-STN' suffix for the satin nickel finish option.

Product Dimensions

Installation

Tub Spout Installation

Instructions for installing the diverter tub spout onto a 1/2" NPT stub out pipe.

Operation

Diverter Lever Positions

Describes lever down for tub spout and lever up for shower operation.

Care and Cleaning

Cleaning Instructions

Guide to clean the trim area with mild soap, water, or non-abrasive cleaner.

Symmons Dia 352TS Specifications

General

Brand	Symmons
Model	Dia 352TS
Category	Plumbing Product
Language	English