Symmons Duro 362SH User Manual

1
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ gethelp@symmons.com ■ ZV-3019 REV 0 01/15/2014
361SH, 362SH
Duro
™
Showerhead Series
Operation & Maintenance Manual
Model Numbers Specifications
361SH Duro 4" 1 Mode Showerhead
362SH Duro 3" 1 Mode Showerhead
4" 1 mode showerhead (361SH) and 3" 1 mode
showerhead (362SH) include standard 2.5 gpm
(9.5 L/min) ow restrictor. Components made from metal
and plastic materials plated in standard polished chrome
nish.
Modifications Compliance
-1.5 1.5 gpm (5.7 L/min) flow restrictor
-2.0 2.0 gpm (7.6 L/min) flow restrictor
-STN Satin nickel finish
Note: Append appropriate -sufx to model number.
-ASME A112.18.1/CSA B125.1
-WaterSense (1.5 & 2.0 gpm for 362SH only)
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Dimensions
AA
B
B
D
D
C
C
361SH
362SH
Note: Dimensions are subject to change without notice.
Measurements
A 3”, 76 mm
B 3 3/8”, 86 mm
C 3 1/2”, 89 mm
D 3 1/2”, 89 mm
Required for Installation
Teon Tape
Certied by
IAPMO R&T
c

Symmons Duro 362SH Specifications

General

Brand	Symmons
Collection	Duro
Model Number	362SH
Product Type	Shower System
Flow Rate	2.5 GPM
Valve Type	Pressure Balance
Handle Style	Lever
Number of Handles	1
Spray Pattern	Full
ADA Compliant	Yes
Finish	Chrome
Material	Brass
Pressure Balance	Yes
Temperature Control	Yes
Installation	Wall Mounted
Warranty	Limited Lifetime
Shower Head Type	Fixed Shower Head

Summary

Product Overview and Specifications

Model Identification

Details the available model numbers for the Duro Showerhead Series: 361SH and 362SH.

Showerhead Specifications

Provides technical specifications including flow rate, materials, and finish for the showerhead series.

Available Modifications

Lists available flow restrictor options (1.5, 2.0 gpm) and finish choices (Satin Nickel).

Compliance Standards

Outlines the compliance with ASME, CSA, and WaterSense standards.

Warranty Information

Details the Limited Lifetime warranty for consumers and 5-Year warranty for commercial use.

Dimensional Measurements

Presents physical dimensions for the 361SH and 362SH showerheads.

Installation, Care, and Troubleshooting

Showerhead Installation Guide

Instructions for installing the showerhead onto the shower arm by turning clockwise.

Care and Cleaning Instructions

Guidance on cleaning the showerhead trim using mild soap and water or non-abrasive cleaners.

Troubleshooting Common Issues

Addresses finish spotting and leaks from the shower arm, providing causes and solutions.