Groups of outlets can be defined (pictured below) in the “Global Settings” section for group-based
operations (e.g. turn on/off/reboot all outlets in Group 1 or 2).
Sequential On Delay refers to the time to wait between turning on each outlet within the group.
If you would like to restrict access and control to specified outlets by user account, refer to the User
Administration and Outlet Reservation section.
SNMP
SNMP functionality is available on “DU*” model netBooters, and can be enabled and configured in the
“Network” settings of the left hand menu. netBooter PDUs support SNMPv1 and SNMPv2c.
Please note that changing SNMP settings requires a network restart, which can be done by clicking
on the “Restart Network” button.
MIB files can be found in the Download section of our Website Support section.
To Next Page
Loading...