SYNAPTICON SOMANET Node 400 - Bootloader

1.4.2.2 Bootloader
Signals that are shown when the Bootloader is active:
Bootloader State
No Fault
(firmware exists)
Fault
(no firmware exists)
Hardware Manuals / SOMANET Node / SOMANET Node rev.
D.3/D.4
© 2020 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.2.0 | Build: 2020-10-02 27/27