4
Chapter 1: Before You Start
Synology DS220j at a Glance
No. Article Name Location Description
1
Status Indicator
Front Panel
Displays the status of the system. For more information, see "LED Indicator
Table".
2
LAN Indicator
Displays the status of the network connection. For more information, see "LED
Indicator Table".
3
Disk Indicator
Displays the status of the installed drive. For more information, see "LED
Indicator Table".
4
Power Button
1. Press to power on the Synology NAS.
2. To power o the Synology NAS, press and hold until you hear a beep sound
and the Power LED starts blinking.
5
Fan
Back Panel
Disposes of excess heat and cools the system. If the fan malfunctions, the
Synology NAS will emit a beeping sound.
6
LAN Port Connect a network cable here.
7
USB 3.0 Port Connect external hard drives or other USB devices to the Synology NAS here.
8
Reset Button
1. Press and hold until you hear a beep sound to restore the default IP address,
DNS server, and password for the
admin
account.
2. Press and hold until you hear a beep sound, then press and hold again until
you hear three beep sounds to return the Synology NAS to “Not Installed”
status so that DiskStation Manager (DSM) can be reinstalled.
9
Kensington
Security Slot
Attach a Kensington security lock here.
10
Power Port Connect the AC power adapter here.
To Next Page