11 QSG f201 version 2.1
Firestar™ f201 laser & Flyer 3D System Quick Start Guide
15. Connect the Marking Head DC power VDC cable into the Marking Head’s power supply.
16. Connect the Laser’s DC Power (20A FAST 96 VDC 36A) to the laser’s power supply.
15.1 DC Power connection locations (for the Marking Head).
16.1 DC Power connection location (for the Laser).
Electrical Connections:
Attention:
For further details, please see the Getting Started (Connecting-DC power
supply connections) section in the Firestar f201 Laser Operator’s Manual
and Getting Started (Connecting-DC power cable) section in the 3D Mark-
ing Head Operator’s Manual.
To Next Page
Loading...
