Trauma Recon System Instructions for Use Synthes 1
TRS Recon Sagittal Saw
Care and Maintenance
Power Tool 32
– Handpiece (05.001.240) 32
– Lid (05.001.241) 32
– Power module (05.001.202) 33
Functions of the Lid for TRS Recon Sagittal Saw 34
– Mode switch 34
Working with the TRS Recon Sagittal Saw 35
– Starting the TRS Recon Sagittal Saw 35
– Positioning the saw head 35
– Changing the saw blades 36
– Working with the TRS Recon Sagittal Saw 36
– Instructions for handling saw blades 36
General Information 37
– Unusual Transmissible Pathogens 37
– Important 37
Preparation prior to Cleaning 38
– Disassemble 38
Manual Cleaning Instruction 39
– Remove debris 39
– Spray with solution 39
– Rinse with tap water 39
– Clean with detergent 40
– Rinse with tap water 40
– Visually inspect device 40
– Finale rinse with de-ionized/purified water 41
– Dry 41
Mechanical /Automated Cleaning Instruction 42
with Manual Pre-cleaning
– Remove debris 42
– Spray with solution 42
– Clean with detergent 43
– Rinse with tap water 43
– Visually inspect device 43
– Load washing basket 44
– Automated cleaning cycle parameters 44
– Inspect device 44
Lubrication 45
– The following individual parts must be lubricated 45
To Next Page