EasyManua.ls Logo

Synway SMG4002 - User Manual

Synway SMG4002
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Synway SMG Series Wireless Gateway
SMG4002
SMG4004
SMG4008
SMG4016
SMG4032
Wireless Gateway
Version 3.0.0
Synway Information Engineering Co., Ltd
www.synway.net
Question and Answer IconNeed help?

Do you have a question about the Synway SMG4002 and is the answer not in the manual?

Summary

Synway SMG Series Wireless Gateway User Manual

Chapter 1 Product Introduction

Overview of the Synway SMG Series Wireless Gateway, including applications, features, and hardware.

Chapter 2 Quick Guide

Provides basic operations for quick setup and initial use of the wireless gateway.

Chapter 3 WEB Configuration

Detailed guide for configuring the wireless gateway via its web interface.

3.6 Wireless Settings

3.6.1 Basic Parameters

Configuration of fundamental wireless settings like voice encoding and DTMF modes.

3.6.2 Wireless Parameters

Settings related to wireless modules, including voice volume and network scan.

3.6.3 Call Forwarding

Configuration for call forwarding features across different ports.

3.6.9 SIM Card Management

Managing SIM card states, auto-switch strategies, and grouping.

3.6.10 PIN Manage

Manage SIM card PIN and PUK status, including locking and unlocking.

3.6.17 Lock SIM

Features for locking SIM card slots based on various conditions.

3.7 Call Management

3.7.1 Balance Query

Querying the balance of a designated cell phone number.

3.7.2 Port Limit Settings

Configuring call time limits, clearing cycles, and call time alarms.

3.7.5 Blacklist Management

Setting up a blacklist to restrict incoming calls.

3.7.6 SMS Count

Monitoring and managing SMS counts per port.

3.8 Port Settings

3.8.1 Port Configuration

Detailed settings for individual ports, including SIP registration and connection methods.

3.8.2 Port Group Management

Creating and managing groups of ports for unified configuration.

3.9 Route Settings

3.9.1 Routing Parameters

Configuring call routing rules before or after number manipulation.

3.9.2 IP to Tel;IP Routing

Setting rules for routing calls from IP to Tel/IP.

3.9.3 Tel to IP Routing

Setting rules for routing calls from Tel to IP.

3.10 Number Manipulation

3.10.1 IP to Tel;IP CallerID Manipulation

Rules for manipulating CallerID in IP to Tel/IP calls.

3.10.3 Tel to IP CallerID Manipulation

Rules for manipulating CallerID in Tel to IP calls.

3.11 System Tools

3.11.1 Upgrade Firmware

Procedure for upgrading the gateway's firmware, service, and kernel.

3.11.2 Signaling Capture

Capturing network packets for troubleshooting SIP and RTP traffic.

3.11.4 Call Log and SIP Log

Viewing and downloading call logs and SIP communication records.

3.11.6 Change Password

Changing the gateway's username and password for security.

3.11.7 Backup & Upload Configuration

Backing up and restoring the gateway's configuration files.

3.11.8 Factory Reset

Restoring the gateway to its default factory settings.

3.11.12 PING Test

Performing a Ping test to check network connectivity to an IP address.

3.11.13 TRACERT Test

Executing a Tracert test to diagnose routing issues.

Appendix A Technical Specifications

Appendix B Troubleshooting

Appendix C About VPN

Appendix D CDR Hangup Reason

Appendix E Technical;sales Support

Synway SMG4002 Specifications

General IconGeneral
ModelSMG4002
CategoryGateway
Protocol SupportSIP, H.323
Operating Temperature0°C to 40°C
Voice CodecsG.711, G.723.1, G.729A/B
FaxT.38, G.711 pass-through
Echo CancellationG.168
Network Interface10/100 Ethernet
Power Supply12V DC, 1A
Humidity10% to 90%, non-condensing

Related product manuals