SYSMEX KX-21 - Page 159

QUALITY CONTROL
Sysmex KX-21 Operator’s Manual -- Revised October 1998 5-29
5. HC OUTPUT (OPTION)
Using this menu, QC data in the line cursor position can be output to the host computer
(option).
How to output QC Data to HC
(1) Display the QC Chart screen of QC file that contains the data you want to output to the
host computer.
For how to select QC file, refer to Chapter 2.3: Select QC File in this chapter.
(2) Using [
] key or [ ] key, move the line cursor to the position of the data you want
to output to HC.
(N=30) 31/12
UL
WBC
RBC
HGB
LL
UL
LL
UL
LL
LIMIT DATA
(MEAN)
8.1
7.6 7.3
7.1( 7.8)
4.70
4.50 4.52
4.30( 4.55)
15.5
15.0 14.8
14.5( 15.0)
FILE No.1
1:QC Analyze 2:Settings 3:Erase All
Figure 5-5-1: QC Chart Screen
(3) Press [ENTER] key.
The line cursor changes from dotted line to solid line, and the menu in the Menu
Display Area changes over to "1: Delete," "2: Print," "3: HC Output."
NOTE: • Press [ENTER] key again, and the line cursor returns to dotted line and
the menu in the Menu Display Area change to the original status.
• The line cursor that has changed to solid line cannot be moved.
• "3: HC Output" on the menu is displayed only when the serial interface
(option) is incorporated.