INSTALLATION
Sysmex KX-21 Operator’s Manual -- Revised October 1998 A-1
1. INTRODUCTION
This product is a clinical test instrument. Sysmex representative is responsible for
unpacking, installing, and initial setup of the product to ensure its proper and safe operation.
The next several pages will give some essential information on this instrument.
NOTE: • When the optional serial interface function is intended to incorporate to
this instrument, followin
optional part should be ordered in prior to the
installation so that S
smex service representative could install at once.
973-4531-1 OUTPUT UNIT NO. 1 KX-21
Sysmex KX-21 Operator’s Manual -- Revised January 2000
To Next Page
