INTRODUCTION
1-14 Sysmex KX-21 Operator’s Manual -- Revised October 1998
12.4 Installation Environment
• Use the instrument at an ambient temperature of 15°C - 30°C (optimum: 23°C).
• Use it at a relative humidity range of 30% - 85%.
• When air conditioning is used, the maximum cooling capacity of about 172 kcal/hour is
required to offset the heat from the instrument.
• Avoid a place that can become extremely hot or cold.
• Avoid a place that can be exposed to direct sunlight.
• Choose a well-ventilated place.
• Avoid a place close to a wireless telegraph or communication facility where high
frequency waves can be generated or radio interference can occur.
To Next Page
Loading...
