SYSMEX KX-21 - Page 43

SAMPLE ANALYSIS
Sysmex KX-21 Operator’s Manual -- Revised October 1998 2-7
2. Confirming the "Ready"
When auto rinse and background check are normally completed, the buzzer (single
beep) sounds briefly and "Ready" is displayed. The LCD screen displays the result of
background check (sample No. "0").
00/00 00:00No.0 WB
P-LCR ---.-%
MPV ---.-fL
PLT 0
×10
3
/µL PDW ---.-fL
MCHC ---.-g/dL RDW ---.-fL
MCH ---.-pg NEUT# ---.-×10
3
/µL
MCV ---.-fL MXD# ---.-×10
3
/µL
HCT 0.0% LYM# ---.-×10
3
/µL
HGB 0.0g/dL NEUT% ---.-%
RBC 0.00×10
6
/µL MXD% ---.-%
WBC 0.0×10
3
/µL LYM% ---.-%
No.1 WB
1:M.Discri. 2:Print 3:Paper Feed
Ready
Figure 2-2-5: Ready Status
NOTE: • When the power is on, the next sample No. is displayed "1."