SYSMEX KX-21 - Page 8

Sysmex KX-21 Operator’s Manual -- Revised October 1998
VI
STRUCTURE OF THIS MANUAL
Read this manual carefully so you will be able to use the instrument to its full extent, and
operate it correctly. This manual contains ten Chapters and APPENDICES as listed in the
following:
Chapter 1: Introduction
Describes overview of this instrument, including the
outline of the instrument, operation procedure, and
messages, and cautions during installation.
Chapter 2: Sample Analysis
Describes procedures for start-up of the instrument,
measurement of the sample, and shut-down.
Summarizes the operation method for analyzing the
sample.
Chapter 3: Display and Processing of
Analysis Results
Describes the displayed content of the analysis data,
and the process of the latest sample/stored data.
Also describes the manual analysis and the external
output.
Chapter 4: Maintenance and Supplies
Replacement
Describes scheduled maintenance and replacement
method of supplies such as reagent.
Chapter 5: Quality Control Describes execution procedures of the
X
control and L-
J control for quality control.
Chapter 6: Calibration
Describes procedures for automatic/manual calibration.
Chapter 7: Troubleshooting
Describes error messages and troubleshooting.
Chapter 8: Adjustment
Describes the method of pressure adjustment based on
the troubleshooting.
Chapter 9: Functional Description
Describes the analyzing principles of this instrument
and names of the components.
Chapter 10: Instrument Setup
Describes the system environment setting such as
date, time, and unit, and the data analysis setting such
as data error judgment.
Appendix A: Installation
Describes the installation method of the KX-21.
Appendix B: Technical Information
Technical reference data describing the specification for
host output format.
(The host output function is an option.)