System Cleaners MS5 - PS5, MS5, PS7, MS7 Technical Specifications; PS5;MS5;PS7;MS7 Pump and Electrical Details; PS5;MS5;PS7;MS7 Water and Air Inlet Specs

Version 9 (02.2018. EN) (MS5, MS7, PS1, PS3, PS5, PS7)
Page 44 of 48
Model
PS5
MS5
PS7
MS7
Installation
Ambient temperature
3-40°C / 37-104°F
Pump
Pump type
CRNE 5-14J
CRNE 10-9J
Motor power
6 kW / 8 HP
7.5 kW / 10 HP
Frequency drive
Integrated in pump motor
Degree of protection
IP 54
Connections
In- and outlet
1½” BSP or NPT
Water, inlet
Pressure
1.5-10 bar / 23-150 psi
Maximum pump cut-out pressure
1.5 bar / 23 psi
Temperature
3-70°C / 37-160°F
Minimum pump cut-out temperature
90°C / 190°F
Minimum recommended flow
12 m³/h / 52.8 USgal/min
15 m³/h / 66 USgal/min
Water, outlet
Setpoint
20 bar / 290 psi
Maximum flow at 20 bar (290 psi)
(including 4.0 bar (58 psi) inlet pressure)
150 liter/min / 39.6 US gal/min
200 liter/min / 52.8 USgal/min
Air, inlet
Pressure
-
5-10 bar /
72-145 psi
-
5-10 bar /
72-145 psi
Minimum flow
-
150 liter/min /
5.3 cfm
-
200 liter/min /
7.1 cfm
Electrical 400 and 460V
Voltage and frequency
3x380-500V +/- 10% 50-60 Hz
Current
9.0-11.5 A
11.2-14.1 A
Recommended pre-fusing
20 A
32 A
Recommended cable cross section
4 x 1.5 mm² / 4 x AWG16
4 x 2.5 mm² / 4 x AWG14
Chemical
Dosing range
-
0.2–6%*
-
0.2–6%*
Dimensions
Weight
125 kg /
276 lbs
135 kg /
298 lbs
150 kg /
331 lbs
160 kg /
353 lbs