EasyManua.ls Logo

System One S Series - MANUFACTURERS WARRANTY; Warranty Terms and Conditions; Environmental and Legal Information

System One S Series
12 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DEFECTS & PERFORMANCE: SystemOne Series 500 Parts Washers (“Equipment”) are warranted
by SystemOne Technologies Inc., (“Manufacturer”), to be free of defects in materials and workmanship
and to perform in accordance with the Manufacturer’s specifications and operating manual
(“Warranty”) for sixty (60) months commencing on the date of delivery (Warranty Period). During
the Warranty Period, the Manufacturer will supply all required parts & components directly to the
customer, including detailed installation instructions and direct telephonic assistance from
Manufacturer’s Technical Support Center, free of charge, for on-site installation by the customer.
Wearable items such as brushes and spouts are excluded.
ENVIRONMENTAL INFORMATION: Equipment owners/users/operators are responsible for
establishing the waste characteristics of their waste stream generated as distillation residue. If
information on specific products is unavailable, or if the hazardous or non-hazardous determination is
inconclusive, customer should have a waste stream TCLP conducted by a commercial lab. Contact
local and state authorities, as well as the EPA when in receipt of your waste analysis to determine the
residue disposal requirements in your area.
SOLE SOURCE AFFIDAVIT: (i) SystemOne Technologies Inc. possesses the sole and exclusive rights
to manufacture, market and/or distribute various proprietary models of industrial parts washers under
the SystemOne
®
trademark; (ii) SystemOne and/or its authorized distributors and service agents are
the sole and exclusive source for all SystemOne equipment, parts and service; (iii) SystemOne
currently holds 24 valid United States and International patents on its proprietary technology; and (iv)
SystemOne possesses the sole and exclusive rights to the use of the SystemOne
®
trademark
LIMITED WARRANTY: The Manufacturer shall not be responsible under this limited Warranty for
damages resulting from (i) failure to follow Manufacturer’s installation, operation or maintenance
instructions, (ii) Unauthorized system modification or alteration under the customer’s control, (iii)
accident, abuse, misuse or negligent acts or omissions of the customer or persons under the
customer’s control; or acts of God. THERE ARE NO OTHER EXPRESS WARRANTIES, WHETHER
WRITTEN OR ORAL, OTHER THAN THE WARRANTY SET FORTH IN PARAGRAPH 1 ABOVE. ALL
IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED.
LIMITATION OF WARRANTY: The liability of the Manufacturer and its affiliates, distributors and
suppliers for any claims, losses, damages or expenses from any cause whatsoever (including acts or
omissions of third parties), regardless of the form of action, whether in contract, tort, or otherwise
shall not exceed the lesser of (i) the direct damages proven, (ii) the repair or replacement cost, lease
payoff or purchase price, as the case may be, of the Equipment that directly gives rise to the claim.
The Manufacturer shall not be responsible for any incidental, special, punitive, exemplary, reliance,
consequential (including but not limited to lost profits or lost revenues) or indirect loss or damage
incurred in connection with the Equipment to the full extent those damages can be disclaimed by law.
For personal injury caused by the Manufacturer’s negligence, the Manufacturer’s negligence shall be
limited to proven damages to person. No action or proceeding against the Manufacturer or its affiliates,
distributors or suppliers may be commenced more than twelve (12) months after the cause of action accrue.
MANUFACTURER’S WARRANTY

Related product manuals