Error Definition and
Description
Error Definition and Description
XH4
Inverter module protection
XL0 Inverter module fault
H5
3X P2 protection fault in 60
minutes
XL1 DC bus low voltage protection
H6
3X P4 protection fault in 100
XL2 DC bus high voltage protection
High-pressure sensor fault
MCE fault/synchronization/closed loop
3X P9 protection in 60
minutes
XL5 Zero speed protection
Low pressure sensor fault
Phase sequence error protection
3X PL protection in 100
minutes
Protection against sudden speed
change in compressor > 15Hz
F0
3X PP protection in 100
minutes
XL9
Protection to prevent the difference
between the speed setting and actual
operating speed of the compressor >