T-Fal ActiCook & Stir RK901B51 - Jam Function; Porridge Function

17
EN
JAM FUNCTION
• Press the “Menu” key to select the function “Jam”. The screen displays
the default cooking time and the “Start” light flashes red.
• Press the “Temperature/Timer” key to activate the time setting
function and then press “<” and “>” to change the cooking time. Press
“Temperature/Timer” again to change the temperature by pressing “<”
and “>”.
• “Stir” lights up. Press the “Stir” key to turn off the “Stir” function. Press
it again to activate it. If no action is taken before cooking starts, the
stirring function automatically stays on.
• Press the “Start” key. The multicooker starts the “Jam” cooking program and
the “Start” light comes on. The screen displays the remaining cooking time.
• At the end of the cooking process, the multicooker “beeps” three times.
Note: There is no keep warm function for this program.
PORRIDGE FUNCTION
• Press the “Menu” key to select the function “Porridge”. The screen
displays the default cooking time and the “Start” light flashes red.
• Press the “Temperature/Timer” key to activate the time setting function
and then press “<” and “>” to change the cooking time.
• “Stir” lights up. Press the “Stir” key to turn off the “Stir” function. Press
it again to activate it. If no action is taken before cooking starts, the
stirring function automatically stays on.
• Press the “Start” key. The multicooker begins the “Porridge” cooking
program and the “Start” light comes on. The screen displays the
remaining cooking time.
• At the end of the cooking process, the multicooker “beeps” three times
and begins the keep warm program, the “Keep Warm” indicator comes
on and the screen displays the time for which the keep warm function
has been active.
Note:
• Do not use the steam basket to cook with this function because it
may cause the steam basket to melt.