27
EN
TEMPERATURE FUNCTION
STIRRING FUNCTION
AUTO RINSE FUNCTION
• To use the temperature function, first choose a cooking program and
the cooking time. Then, press the key “Temperature/Timer” and choose
the temperature. The default cooking temperature changes depending
on the selected cooking program. Each press of the “<” and “>” keys
increases or decreases the temperature.
• When you have chosen the required temperature, press the “Start” key
to enter the cooking status and the “Start” indicator remains on.
• You can modify the temperature during the cooking process by pressing
the “Temperature/Timer” key. After selecting the chosen temperature
and if there is no action during the first 5 seconds, the multicooker
resumes the cooking process with the new setting.
• To use the stirring function, first choose a cooking program and cooking
time. Then, press the key “Stir” to activate or deactivate the paddle.
• When you have chosen the stirring mode, press the “Start” key to enter
the cooking status and the “Start” indicator remains on.
• You can see that the stirring function is on when it lights up.
• Use the automatic auto rinse function to perform a prewash of the
bowl.
• To use the auto rinse function, assemble the rinsing tool with the
bottom connector and the support ring – fig15.
• Put it in the bowl and add 600mL of water – fig.16.
• Press the “Auto Rinse” key.
• The default auto rinse time is 10 minutes. Press the “Temperature/
Timer” key to activate the time setting function and then press “<” and
“>” to change the rinsing time.
To Next Page
Loading...
