Empty and clean the capsule bin. Rinse and
clean water tank. Afterwards rell with fresh,
drinking water and insert it to machine.
Place drip grid on drip tray. Then insert drip
tray at desired position of machine. Clean ma-
chine with a soft damp cloth. Dry it afterwards
with a soft dry cloth.
Follow instructions on descaling kit
user manual.
Avoid contact of descaling liquid
with any part of the machine.
Do not use vinegar for descaling. Do not push power button during
descaling cycle.
Empty and clean the capsule bin. Rinse and
clean water tank. Afterwards rell with fresh,
drinking water and insert it to machine
At the end of rinsing cycle, the power button
lights up red. Wait until machine switches back
to normal operation. Then switch the machine
o.
Move lever to the right to start rinsing. Bar display
begins to count down. Wait until the lever comes
back to the middle and extraction stops.
Move lever to the left to start rinsing. Bar display
begins to count down. Wait until the lever comes
back to the middle and extraction stops.
To Next Page
Loading...
