T-Mobile Sonic 4G - WLAN Configuration; Configuring SSID and Password

14
Configuring the WLAN SSID and Password
The service set identifier (SSID) is used to identify a WLAN. A Client and the device can
perform normal data communication only when they have the same SSID. To ensure the
WLAN security, do not use the default SSID. You can enter a character string as the SSID,
such as MyHome.
1. Click Setting > Device Setting > Change SSID & Password
2. Change the default SSID in the (Name) SSID textbox.
3. Click Next.
4. Change the default SSID Password in the WPA Pre-Shared Key textbox.
5. Click Finish.
Note: To access the WLAN easily, you can select Enabled for SSID Broadcast when you
configure the WLAN settings. After the settings, you can select Disabled to improve the
WLAN security.