47
1 Spreading device for Taarup 4024 - 4028 - 4032 - 4036
The above machine types can be equipped with spreading device as optional equipment. With this
equipment it is possible to cut and spread the crop in one pass.
The grass is spread in the whole working width and evenly over the whole field. Time and at least
one pass with a tedder is saved.
Wilting of the grass starts immediately ensuring that the nutrients are conserved and that the
quality of the crop is improved.
Assembly instructions, operator's manual and spare parts list are delivered with the equipment.
2
Bx Auto-Swath attachment
With this attachment two swaths can be put together into one swath. First one swath is cut with the
Bx belt in raised position, shown at A, - for the next swath the belt is lowered as shown at B.
Time is saved and the capacity of the following chopper or baler is increased. The flexibility of
this system allows the operator to choose between single swath or bringing swaths together without
spending time for conversion.
Assembly instructions, operator's manual and spare parts list are delivered with the equipment.
3
Swath deflectors (not model 4036 and 4036 C)
The models 4024, 4028, 4028 C, 4032 and 4032 C can be equipped with hydraulic swath deflectors
as a factory fitted option.
With this equipment 2 swaths can be placed along side each other. Both swaths can be picked up
at the same time by f.ex. a precision chopper thus maximing the output of this machine.
With careful positioning of the swaths, the tractor will not drive on the grass mown. The deflector
plates can be set in different positions to suit the width of the pick-up.
Examples of use of the equipment are shown in the sales litterature.
Assembly instructions, operator's manual and spare parts list are delivered with the equipment.
To Next Page
Loading...