2
Power HDMI USB AntennaEthernet
STEP 1
Getting Connected
Connect Your HDTV Antenna
For optimal OTA reception, place your antenna near a window or outdoors, pointing towards
your local broadcast towers. Next, connect your antenna to your Tablo DVR via the coaxial
connection. Ensure the connector is tightly secured.
Connect a USB Hard Drive
Connect a USB hard drive (1 TB to 8 TB in size).
Connect Tablo to your TV
Use the HDMI cable (provided) to connect your Tablo DVR to your TV.
Connect Tablo to Your Home Network
Use the Ethernet cable (provided) to connect your Tablo DVR to your router. If your TV and
antenna placement does not enable you to connect via Ethernet, connect Tablo to your home
network via WiFi. See page 3 for details.
Connect the Power Adapter
In order to function correctly, your Tablo DVR must be powered on at all times,
including overnight.
For help with antenna selection and positioning, a list of recommended hard drives,
additional set-up instructions and troubleshooting tips, visit www.TabloTV.com/setup.
To Next Page
Loading...