TAC Xenta 421A - 1.4 Typographic Conventions

1 Introduction TAC Xenta, TAC Xenta® 400 I/O Modules
10 (48) TAC AB, Dec 2004
0-004-7771-3 (EN)
1.4 Typographic Conventions
Throughout the manual four specially marked texts may occur.
1.5 More information
The TAC Xenta 400 I/O modules and the other TAC Xenta units are
also described in the following documents:
• the “TAC Xenta 280/300/401 Handbook”, part no. 0-004-7768
• the “TAC Xenta OP Handbook”, part no. 0-004-7506
• the “Engineering Classic Networks”, part no. 0-004-7841
• the “Endangering LNS Networks”, part no. 0-004-7842
• the “Engineering Applications in TAC Menta”,
part no. 0-004-7843 (to be replaced by 0-004-7896)
• data sheets for the TAC Xenta 4xx range (C-92-nn)
• the TAC Xenta OP Operator panel data sheet (C-98-05)
• a brief installation instruction, “0FL”, included at delivery
Warning
Used to emphasize operations that can cause serious personal injury or
damage to property if not handled correctly.
Caution
Used to emphasize operations that can cause serious problems if not
handled correctly.
Note
Used to emphasize certain information.
Hint
Used to emphasize processes that may ease operation.